A careful comparison of VPSA and PSA oxygen production equipment, and the following differences:

1. The VPSA oxygen generator uses a blower to obtain raw air and pressurizes it, while the PSA oxygen generator uses an air compressor to supply air.

2. In the selection of the core component - zeolite molecular sieve, the PSA oxygen generator uses sodium molecular sieve, and the VPSA oxygen generator uses lithium molecular sieve.

3. The adsorption pressure of PSA oxygen generator is usually 0.6~0.8Mpa, and the adsorption pressure of VPSA oxygen generator is 0.05Mpa.

4. The gas output of PSA single machine can reach 200~300Nm/h, and the gas output of VPSA single machine can reach 7500~9000Nm/h.

5. Compared with PSA, VPSA has low energy consumption (power consumption per cubic meter of oxygen production is less than or equal to 0.5 kW), which is more environmentally friendly and green.

Although the VPSA oxygen generator has a large amount of oxygen in a single mechanism, its disadvantage is that the system equipment is relatively complex, the equipment volume is also larger (smaller than the cryogenic device), and the supporting and shared engineering conditions are more required, which will occupy a large amount of space. Space, and can not be made into a container form of oxygen equipment. It needs on-site installation and debugging, just from this point. PSA still has certain advantages.

Guangzhou Huilin Air Separation Equipment Co., Ltd. is a professional manufacturer of PSA nitrogen generators, VPSA oxygen generators, medical oxygen generators, liquid nitrogen generators and other air separation equipment manufacturers. Air separation plants of different specifications can be customized according to customer needs.

Guangzhou Huilin Air Separation Equipment Co., Ltd., specializing in the production of oxygen generators

http://www.huilingas.com