English 
فارسی
français
Deutsch
русский
español
português
العربية
Türkçe
Melayu
VPSA Oxygen Gas Generator
The core process flow of the plant is to use air as raw material and vacuum pressure swing adsorption (VPSA) process to separate and extract oxygen enrichment.
Lead Time:
30daysProduct Orgin:
Guangzhou,ChinaShipping Port:
GuangzhouPayment:
This supplier also supports L/C,D/A,D/P,T/T,WColor:
whiteOxygenated Vehicle for Aircraft
Principle
The oxygenated vehicle is mainly charged with the aeronautical oxygen produced by the surface equipment, and is charged into the vehicle gas cylinder group to transport and convert into the storage system of aircraft and other airplane. The rated discharge pressure of the equipment is 35MPa, which is mainly composed of 7 parts, such as diaphragm compressor, gas cylinder group, trachea control system, electric control system, power transmission system, car and automobile chassis.
When the pneumatic equipment works, the power of the automobile engine is used to drive the diaphragm compressor through the transmission device (using the crank slider), and the electrical control system uses two sets of circuit, computer protection circuit and conventional protection circuit, which have the functions of detection, display, alarm, disorderly close-down and so on. When there is a fire in the compressor compartment of the oxygen filling equipment, the diaphragm compressor will stop automatically, and an electronic control box or manual mode is used to give an electronic control signal to the fully submerged EBM extinguisher. The fire extinguisher is automatically sprinkled by the EBM extinguisher, and the gas source is automatically cut off and the safety protection is realized
Oxygenated Vehicle Parameter
O2 Cylinders Volume: 40L
O2 Cylinders Rated Working Pressure: 35Mpa
Cylinders Qty: 15pcs
External pressure of gas supply： ① 3 MPa ② 15 MPa ③ 23 MPa ④ 25 MPa
Gas supply Quality
Dew Point: ≤ -63 ℃
Solid Pellets: ≯ 100μm
Why choose us
Detail photo
The core process flow of the plant is to use air as raw material and vacuum pressure swing adsorption (VPSA) process to separate and extract oxygen enrichment.
The core process flow of the plant is to use air as raw material and vacuum pressure swing adsorption (VPSA) process to separate and extract oxygen enrichment.
General purpose nitrogen making machine, nitrogen purity from 97% to 99.9995%, flow from 1 to 250 cubic meters per hour.
The whole nitrogen machine is in the box, beautiful shape, easy to move.The highest purity is 99.9995%.
Nitrogen liquefaction machine.Up to 50L/h of liquid nitrogen can be produced.Used for quick freezing of food and ocean fishing.
In some special industries such as medicine and food, when the PSA nitrogen making machine is placed in the production workshop, it is required to meet the GMP standard and adopt all stainless steel material.
Online Service
Tel:+86 13710712082
huilin@world-gas.cn
WhatsApp:+8613724819737